All Drawer Pulls

Click on a picture to see a larger version.

Need to know how to measure for drawer pulls?  Visit How to Measure for Hardware

Colonial Revival

DP-136: 3" Center.  Bail is 2 5/8" by 1".  Backplates are 1 3/16" by 1 7/16".  Cast Brass.  Matches keyhole cover KH-118.

Traditional

DP-106: 3" Centers with bail 1 3/16" high by 3 3/4" wide. Cast bail and stamped back plates. 

DP-104: 3" Centers with bail 1 1/2" high by 3 1/2" wide. Cast bail and stamped back plates. 

3 Sizes Available

Please not that the current inventory of this pull is in a polished brass and may be lighter/shinier than it appears on your screen

DP-107: 3 1/2" Centers with bail dropping 1 1/2". Back plates are 1 1/4" in diameter. Cast brass bail and back plates. 

DP-108: 3" Centers with bail dropping 1 1/2". Back plates are 1 1/8" in diameter. Cast brass bail and back plates. 

DP-145:  2 1/2" Centers with bail dropping 1 1/4".  Backplates are 1" in diameter.  Cast brass bail and backplates.

DP-138:  3" Centers.  3 3/4" long.  7/8" Depth.  Cast iron in a vintage finish. 

DP-139:  3 1/2" center.  5/8" center between holes on each side.  4" long.  1" wide at ends.  1" Depth.  Cast iron in a vintage finish.

Hepplewhite

Hepplewhite style of hardware is done in a stamped brass. However, these pieces are much heavier and sturdier than most other stamped brass hardware.

DP-111a:  2" Diameter with 1 1/2" centers. Stamped steel with antique brass finish.

DP-114: 1 1/2" High by 2 1/2" wide with 2" centers. Stamped brass with a polished finish. 

Eastlake

DP-122: Back plate is 1 1/2" high by 4 1/4" wide with 3" centers done in cast brass. 

DP-124: Back plate is 2 1/2" high by 4 1/4" wide with 3" centers done in stamped brass. 

Victorian

 DP-143: Backplate is 2 1/8" high by 4 1/4" wide with 3" centers. Cast brass. 

DP-144:  Backplate is 2 3/" by 4 7/" with 3" centers.  Cast brass.

DP-109:  3" Center.  Bail is 3 3/4"with a 1 1/4" Drop.  Cast brass.

DP-131: 1 7/8" Center, 4" wide by 1 1/2" high.  Single piece of cast brass.  Lacquered. 

DP-132: Back plate is 4" by 1 1/2" with 3" Center.  Cast brass. 

DP-101: 3" Center, 5" wide bail with a 1 3/4" drop. Cast brass bail with stamped back plates.  

DP-102: 3" Centers, 4" wide with a 1 3/4" drop with cast brass bail and stamped back plates. 

DP-105: 3" Centers, 4" wide with a 1 1/2" drop. Cast brass bail with stamped back plates. 

DP-115: Back plate is 1 3/4" high by 3 3/4" wide with 3" centers done in cast brass. 

DP-117: Back plate is 1 3/4" high by 4" wide with 3" centers done in cast brass. 

DP-116: Back plate is 2 1/2" high by 4 1/4" wide with 3" centers done in cast brass. 

DP-121: Back plate is 2 1/2" high by 5 1/4" wide with 3" centers done in cast brass.  

DP-118: Back plate is 1 7/8" high by 4" wide with 3" centers done in cast brass. 

DP-125: Back plate is 2" high by 4 5/16" wide with 3" centers done in stamped brass. 

DP-127: Back plate is 1 3/4 high by 4" wide with 3" centers done in stamped brass. 

DP-128: Back plate is 2 1/4" high by 4 5/8" wide with 3" centers done in stamped brass. 

DP-129: Back plate is 2 3/16" high by 4 3/4" wide with 3" centers done in stamped brass. 

  Large Drawer Pulls

DP-133  5" Centers with a bail that is 2" high by 4 3/4" wide.  Each back plate is 29/32" in diameter.  Cast brass with and antique finish.   

DP-135 5 1/4" Centers (approximate) with a bail that is 1 1/2" high by 3"wide.  Back plate is 6" high by 1" high.  Cast iron with black base coat.

DP-37:  6.062" by 1.55" by 1.375".   Cast iron with a vintage finish.